A-583-831: antidumping duty order on Stainless Steel Sheet And Strip In Coils from Taiwan

A-583-831 is the US Department of Commerce case number for the antidumping duty order on Stainless Steel Sheet And Strip In Coils from Taiwan, in force since 27 July 1999 and continued after a sunset review on 7 December 2023. Goods in scope entered under this case carry an antidumping cash deposit at entry on top of the normal duty.

Reviewed September 2026 against the ITA order list and the Federal Register.

Case numberA-583-831Antidumping duty (AD), market economy
ProductStainless Steel Sheet And Strip In Coils ITA commodity group: Steel-Related
CountryTaiwan
StatusCurrent Order
Order date27 July 1999 64 FR 40555
Latest continuation7 December 2023 88 FR 85232
Next sunset reviewNovember 2028 month Commerce is due to initiate the five-year review

Rates in the order notice

12.61%All-others weighted-average dumping margin

As printed in the order notice (64 FR 40555, 27 July 1999). The deposit an entry pays today is the rate assigned to the exporter or producer on the invoice in the latest administrative review, which can be higher or lower than this; a company that has never been reviewed keeps the all-others rate. Check the current rate for your supplier in Commerce's ACCESS case record before pricing an order.

Scope, from the order notice

scope of the order. This product is defined as stainless steel strip in coils containing, by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent or less. The product is manufactured by means of vacuum arc remelting, with inclusion controls for sulphide of no more than 0.04 percent and for oxide of no more than 0.05 percent. Flapper [[Page 40556]] valve steel has a tensile strength of between 210 and 300 ksi, yield strength of between 170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of between 460 and 590. Flapper valve steel is most commonly used to produce specialty flapper valves in compressors. Also excluded is a product referred to as suspension foil, a specialty steel product used in the manufacture of suspension assemblies for computer disk drives. Suspension foil is described as 302/304 grade or 202 grade stainless steel of a thickness between 14 and 127 microns, with a thickness tolerance of plus-or-minus 2.01 microns, and surface glossiness of 200 to 700 percent Gs. Suspension foil must be supplied in coil widths of not more than 407 mm, and with a mass of 225 kg or less. Roll marks may only be visible on one side, with no scratches of measurable depth. …

Excerpt from 64 FR 40555. Scopes are amended by later scope rulings and circumvention findings; the notice list below has them.

What A-583-831 means when you import

Cash deposit at entry. For every entry of goods in scope, CBP collects an estimated antidumping duty cash deposit at the rate assigned to the exporter or producer on the entry, on top of the Column 1 duty and any Chapter 99 trade-remedy lines. The same product from two plants in Taiwan can deposit at different rates, so ask the supplier which legal entity will appear as exporter and as producer on the invoice before you price the order.

Deposit now, final duty later. The deposit is not the final duty. The entry stays unliquidated until Commerce completes the administrative review for the period it was entered in, then CBP liquidates it at the rate that review sets, and bills or refunds the difference with interest. AD/CVD entries therefore stay open for years, and the importer of record carries the difference. Commerce must be asked for a review each anniversary month of the order; if nobody asks, entries liquidate at the deposit rate.

Reimbursement certificate. Before liquidation the importer files a certificate under 19 CFR 351.402(f)(2) stating whether the exporter has paid or reimbursed the antidumping duty. If it is not filed, Commerce may presume reimbursement and deduct the duty a second time in the margin calculation. Brokers file it with the entry summary; make sure yours does.

Entry reporting. The AD/CVD case number goes on the 7501 line alongside the HTS number, and any Chapter 99 lines the goods carry are reported in the order CBP prescribes; the tariff updates tracker carries the current Chapter 99 sequence and the actions behind it. Goods finished, cut or packaged in a third country stay in scope if the notice's written scope covers them, so a change of shipping origin is not a change of AD/CVD origin.

Estimating the stack. The tariff simulator returns the Column 1 rate and the Chapter 99 additional duties for an HTS number and origin; it does not add antidumping or countervailing deposits. Add the deposit at your supplier's current rate on top of what it shows. Airlift USA does not hold a US customs broker licence; entries on cargo we move are filed through our licensed broker network.

Federal Register notices

All 57 notices on docket A-583-831 at federalregister.gov → · Case record in Commerce's ACCESS →

Other AD/CVD cases on goods from Taiwan

A-583-871 Boltless Steel Shelving Units Prepackaged for Sale ADA-583-858 Carbon and Alloy Steel Cut-To-Length Plate ADA-583-865 Carbon and Alloy Steel Threaded Rod ADA-583-605 Carbon Steel Butt-Weld Pipe Fittings ADA-583-008 Certain Circular Welded Carbon Steel Pipes And Tubes ADA-583-853 Certain Crystalline Silicon Photovoltaic Products ADA-583-835 Certain Hot-Rolled Carbon Steel Flat Products ADA-583-814 Circular Welded Non-Alloy Steel Pipe ADA-583-867 Common Alloy Aluminum Sheet ADA-583-856 Corrosion-Resistant Steel Products ADA-583-878 Corrosion-Resistant Steel Products ADA-583-875 Dioctyl Terephthalate AD

All orders in place, searchable by product, country and case →

Case list: AD/CVD Orders and Suspension Agreements, International Trade Administration, Enforcement and Compliance — ITA dashboard, export of September 2026. Notices, rates and HTS numbers: Federal Register API v1. Both are US Government works in the public domain. This page is a reference, not legal or customs advice.

Importing stainless steel sheet and strip in coils from Taiwan under A-583-831?

Tell us the product, the exporter and producer named on the invoice, the load port, the US delivery point and the ready date. We come back with the ocean freight, the destination charges and how the entry is filed through our licensed broker network; the AD/CVD cash deposit itself is set by the rate on the entry, not by us.

+1